Make an easy-to-install Wilson and fisher gazebo replacement parts from an eight-column dome kit. PVC construction requires that the post holes be set in the concrete so that the gazebo does not tip over in heavy winds. UV-rated shade fabric will keep you 10 degrees or colder than outdoor air. Create a door frame along one of the eight sides, and seal the gaps between inserts with a sheet of fine-mesh screen to keep insects away.
You eight inlay holes and insert the Wilson and fisher gazebo replacement parts from the kit into the ground. Backfill with gravel and concrete. Hang a spirit level from a plumb bob. Use it to make sure the poles are straight. Make sure a board is placed on top of all two services is level. Attach the ribs to the posts. Secure with PVC cement and hardware included in the kit by the manufacturer.
Build a PVC door frame to fit one of the eight spaces between the poles, using two-inch diameter PVC. Attach it with 1-inch long screws and two edge hinges. Attach a 4-foot 6-inch-by-8-foot-6-inch piece of fine-mesh screen material to the PVC door frame using a staple gun. Attach the Wilson and fisher gazebo replacement to all remaining spaces between posts and you will not avoid love bugs or other annoying insects.